新聞資訊
氧含量對TB8鈦合金力學性能的影響
發布人：上海艾荔艾金屬材料有限公司www.85978597.cn
更新時間：2015-08-29
為了揭示氧含量對TB8鈦合金力學性能的影響規律，通過熔煉生產不同氧含量的TB8鈦合金鑄錠，研究了氧含量對其軋制棒材力學性能的影響。
氧含量對TB8鈦合金力學性能的影響Effect of oxygen content on mechanical properties of TB8
titanium alloy
為了揭示氧含量對TB8鈦合金力學性能的影響規律，通過熔煉生產不同氧含量的TB8鈦合金鑄錠，研究了氧含量對其軋制棒材力學性能的影響。結果表明：隨著氧含量的增加，合金相變點升高，強度增加，塑性降低。合金中平均氧含量每增加0.01%，相變點升高約2
℃，固溶+時效態抗拉強度增加約22 MPa。
In order to reveal the influence of oxygen content on the
mechanical properties of TB8 titanium alloy, TB8 titanium alloy ingot with
different oxygen contents was produced by melting, and the effect of oxygen
content on the mechanical properties of the rolled bar was studied. The result
show that when the oxygen content increases, phase transition point and strength
increase, plasticity decreases, for each additional alloy average oxygen content
of 0.01%, phase transition point increases by about 2 ℃, solid solution plus
aging tensile strength increases about 22 MPa.
以上資料由上海艾荔艾金屬材料有限公司提供，歡迎新老客戶來電洽購。
本文來自上海艾荔艾金屬材料有限公司http://www.85978597.cn，轉載請注明出處。