新聞資訊
電子束冷床爐單次熔煉TA10鈦合金
發布人：上海艾荔艾金屬材料有限公司www.85978597.cn
更新時間：2015-09-07
通過對TA10鈦合金在電子束冷床爐熔煉過程中Ni、Mo元素的過程分析和理論計算，掌握各元素的揮發機理和揮發動力學，研究TA10合金在電子束冷床爐上的單次熔煉工藝。
電子束冷床爐單次熔煉TA10鈦合金Single melting of TA10 titanium alloy by electron beam cold hearth
通過對TA10鈦合金在電子束冷床爐熔煉過程中Ni、Mo元素的過程分析和理論計算，掌握各元素的揮發機理和揮發動力學，研究TA10合金在電子束冷床爐上的單次熔煉工藝。結果表明：經電子束冷床爐單次熔煉的TA10合金鑄錠化學成分均勻，鑄錠宏觀組織均勻，生產的鑄錠經后續加工所得到的產品均滿足標準要求。
Through the analysis of the process and theoretical calculations for Ni and Mo elements during electron beam cold hearth melting, the element evaporation mechanism and kinetics of volatile were discussed. Single electron beam cold hearth melting technology of TA10 alloy was studied. The results show that the chemical compositions of the TA10 alloy ingot are uniform by electron beam cold hearth melting, the macro homogeneous is good, and the product meets the standards through the subsequent processing.
以上資料由上海艾荔艾金屬材料有限公司提供，歡迎新老客戶來電洽購。
本文來自上海艾荔艾金屬材料有限公司http://www.85978597.cn，轉載請注明出處。