輥模拉伸Ti6A14V鈦合金絲材的力學性能分析
發布人：上海艾荔艾金屬材料有限公司www.85978597.cn
更新時間：2015-12-28
研究輥模拉伸TC4鈦合金絲材的組織和性能，并與傳統拉伸工藝相比較。
輥模拉伸Ti6Al4V鈦合金絲材的力學性能分析Analysis of mechanical properties of Ti6Al4V wire?produced by roll-die drawing研究輥模拉伸TC4鈦合金絲材的組織和性能，并與傳統拉伸工藝相比較。結果表明：由于二者拉伸過程中絲材所受的摩擦力大小及摩擦力形式不同，使得經過輥模拉伸生產的絲材表面光亮，內部組織更加均勻、細?。欢鴤鹘y(tǒng)工藝生產的絲材表面易出現劃傷、粘模等加工缺陷，其內部的晶粒較大。將兩種不同拉伸工藝生產出的產品經過再結晶退火后處理，發現輥模拉伸生產出的絲材具有強度高、塑形好等優點，其力學性能遠遠高于采用傳統工藝生產的同規格絲材。
The relationship between the mechanical properties and microstructures of Ti6Al4V alloy wire manufactured by roll-die drawing was discussed, and the difference between the traditional process and the new manufacturing method was compared. The results show that, because of the differences of frictional forms under two production ways, the wire manufactured by cold roll-die drawing has brighter surface and the microstructure is also finer. The wire produced by new method doesn’t have drawing imperfections, such as pitting, scratching, showing much higher mechanical properties after annealing.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博和微信和我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo?and?Weixin.