Ti80合金熱壓縮變形組織與加工圖
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-01-23
在Gleeble?1500熱模擬機上對Ti80合金進行了熱模擬壓縮試驗，變形溫度為800~1 050 ℃，應變速率為0.001~10 s?1，最大變形量為60%。
Ti80合金熱壓縮變形組織與加工圖Microstructure and processing map of hot compressing?deformation of Ti80 alloy在Gleeble?1500熱模擬機上對Ti80合金進行了熱模擬壓縮試驗，變形溫度為800~1 050 ℃，應變速率為0.001~10 s?1，最大變形量為60%。變形組織分析表明：在低應變速率或接近相變溫度的高應變速率條件下變形，可以發生動態再結晶。根據熱壓縮試驗數據建立的加工圖表明：Ti80合金在高溫變形時主要有2個合適的加工區域，一個是變形溫度為800~950 ℃，應變速率為0.01 s?1以下的區域；另一個是在相變溫度以下40 ℃內，應變速率為10 s?1以上的區域。
The isothermal compression of Ti80 alloy was carried out on a Gleeble?1500 simulator at temperature of 800?1 050 ℃, strain rate of 0.001?10 s?1?and maximum deformation of 60%. The microstructure analysis after hot deformation indicates that recrystallization occurs under the condition of low strain rate and high strain rate near transformation temperature. According to the experimental data, the obtained processing map presents two suitable process zones, including temperature region of 800?950 ℃ and under 0.01 s?1?and that of 40 ℃ lower than transformation temperature and beyond 10 s?1?of strain rates.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信，領英和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn?and?Twitter.