超輕Mg-Li-Al系變形鎂合金擠壓板材的組織及性能
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-01-29
通過OM、SEM、XRD和拉伸實驗研究3種典型的Mg-Li-Al合金的鑄態和擠壓態組織及力學性能。
超輕Mg-Li-Al系變形鎂合金擠壓板材的組織及性能Microstructure and mechanical properties of as-extruded ultra-light Mg-Li-Al sheet通過OM、SEM、XRD和拉伸實驗研究3種典型的Mg-Li-Al合金的鑄態和擠壓態組織及力學性能。結果表明：隨著Li含量的增加，合金的結構從密排六方向體心立方轉變，合金的鑄態組織隨之發生改變。經過250 ℃擠壓處理后，Mg-5Li-1Al和Mg-9Li-1Al合金的晶粒沿?cái)D壓方向呈方向性排列，Mg-14Li-1Al合金由均勻的等軸晶(再結晶晶粒)組成。隨著Li含量的增加，擠壓態合金板材的屈服強度逐漸增大，其中擠壓態Mg-9Li-1Al合金板材的綜合力學性能最佳(屈服強度達到149 MPa，伸長率達到25%)。
The as-cast and extruded microstructures and mechanical properties of three kinds of Mg-Li-Al alloys were studied by optical microscopy, SEM, XRD and tensile test. The results show that, with the increase of lithium additions, the crystal structure transforms from close-packed hexagonal (HCP) structure to body centered cubic (BCC) structure, and the as-cast microstructures of the Mg-Li-Al alloys change correspondingly. After extrusion at 250℃, the grain of Mg-5Li-1Al and Mg-9Li-1Al alloys are arranged along the extruded direction, but the microstructures of Mg-14Li-1Al alloy sheet consist of equiaxed crystals. The yield stress of the extruded alloys is improved gradually with the increase of lithium content. The extruded Mg-9Li-1Al alloy obtains the optimal mechanical properties (the yield stress and elongation are 149 MPa and 25%, respectively), along the transverse direction.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信，領英和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn?and?Twitter.