FB2馬氏體耐熱鋼中Laves相在焊接過程中演化行為的研究
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-03-21
采用熱模擬的方法研究了 FB2 鋼(一種新型 9%Cr 馬氏體耐熱鋼)中 Laves 相在焊接熱循環中的演化行為. 首先借助 SEM 發現了存在于原始供貨狀態下的 FB2 鋼中尺寸在微米級別的 Laves 相顆粒; 進一步的分析表明, 這些 Laves 相的出現是由鑄造過程中的枝晶偏析導致的.
FB2馬氏體耐熱鋼中Laves相在焊接過程中演化行為的研究EVOLUTION BEHAVIOR OF LAVES PHASE IN FB2 STEEL DURING?WELDING采用熱模擬的方法研究了 FB2 鋼(一種新型 9%Cr 馬氏體耐熱鋼)中 Laves 相在焊接熱循環中的演化行為. 首先借助 SEM 發現了存在于原始供貨狀態下的 FB2 鋼中尺寸在微米級別的 Laves 相顆粒; 進一步的分析表明, 這些 Laves 相的出現是由鑄造過程中的枝晶偏析導致的. 焊接熱模擬實驗結果表明, 在加熱過程中, Laves 相與基體γ -Fe 發生共晶反應導致的組分液化會給 FB2 鋼熱影響區帶來熱裂傾向; 在冷卻后的樣品中發現了一些網狀的共晶組織, 利用 SEM 的 EDS 和 TEM 分別得到了該共晶組織的成分信息和結構信息, 確定該共晶組織的 2 個組分為χ 相和γ -Fe. 在此基礎之上, 較為詳細地分析了不同峰值溫度熱模擬后樣品中共晶組織的形成過程, 解釋了共晶組織不同形貌的產生原因.?
Elevating steam parameters are the main key to enhance the efficiency of fossil power plants, to?reduce fuel consumption and noxious emission. Therefore, a lot of new creep resistant martensitic stainless steels?have been developed, among which FB2 steel (a new 9%Cr martensitic stainless steel) is the most promising?candidate for manufacturing steam turbine rotors operated at temperature range from 600 ℃ to 650 ℃. In the?present work, the evolution behavior of Laves phase in the as received FB2 steel was studied by thermal?simulation technique. Firstly, some sparse micron-sized particles of Laves phase were observed in as received FB2?steel by SEM. It was concluded that the large Laves phase particles formed in casting due to dendritic segregation.?Then constitutional liquation resulting from eutectic reaction between Laves phase and γ -Fe in the heating?process of welding thermal simulation was found, suggesting a liquation crack tendency in heat affected zone of?FB2 steel. In the specimens experiencing thermal simulation, some eutectic microstructures were observed by?SEM. Based on the results of EDS analysis and SAED, the two eutectic constituents were identified as χ phase?and γ-Fe. At last, the reason for the difference in morphology of eutectic microstructures between specimens?experiencing thermal simulation with different peak temperatures was analyzed.?
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信，領英，XING，臉書和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn,?XING, Facebook?and?Twitter.