DD5單晶高溫合金大間隙釬焊的組織演變與界面形成機制研究
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-05-01
采用新型Ni-Co-Cr-W-B+DD99混合粉末釬料焊接DD5單晶高溫合金, 分析釬料成分對接頭顯微組織演變和接頭力學性能的影響, 探討Ni-Co-Cr-W-B釬料/DD99合金粉的界面形成機制與接頭形成機理.
DD5單晶高溫合金大間隙釬焊的組織演變與界面形成機制研究Microstructure evolution and interfacial formation mechanism of?wide gap brazing of DD5 single crystal superalloy采用新型Ni-Co-Cr-W-B+DD99混合粉末釬料焊接DD5單晶高溫合金, 分析釬料成分對接頭顯微組織演變和接頭力學性能的影響, 探討Ni-Co-Cr-W-B釬料/DD99合金粉的界面形成機制與接頭形成機理. 結果表明, 在釬焊過程中, Ni-Co-Cr-W-B釬料/DD99合金粉的界面上首先形成了γ-Ni初生相, B偏析并析出細小顆粒狀的 M3B2 型硼化物, 在冷卻過程中殘余液相形成塊狀 M3B2相、γ+γ′共晶相和 γ-Ni+Ni3B+CrB 共晶相. 提高混合粉末釬料中 DD99 合金粉的配比, 可有效抑制焊縫中的硼化物和低熔點共晶相的形成, 提高焊縫成分和組織均勻性. 當 DD99 合金粉的配比增加至 70% (質量分?jǐn)?shù))時, B 可均勻擴散至 DD5 母材和DD99 合金粉中, 未觀察到低熔點共晶相, 界面處脆性化合物相顯著減少, 接頭高溫性能提高. 接頭經過固溶處理和時效處理后, 在870 ℃的高溫拉伸性能可提高至1010 MPa, 在980 ℃, 200 MPa下的持久壽命超過100 h.
Ni-based single-crystal superalloy DD5 has excellent high temperature properties, which is the?preferred raw material for aero-engine turbine blade in recent year. In this research, DD5 superalloy was brazed?by different contents of Ni-Co-Cr-W-B+DD99 mixed powder filler alloy. The microstructure evolution and?interfacial formation mechanism of DD5 superalloy brazing joint were analyzed by SEM and EPMA. The?mechanical properties of joint after solid solution treatment and aging treatment were tested. The results show that?γ-Ni primary phase formed firstly in the Ni-Co-Cr-W-B/DD99 interface during the brazing process, and then B?element segregated and precipitated to fine granular M3B2 type boride. The residual liquid phase solidified and?formed lastly to the M3B2 phase, γ+γ′ eutectic phase and γ-Ni+Ni3B+CrB eutectic phase during cooling. With?increasing the ratio of DD99 in mixed powder filler alloy, the low melting point eutectic phase and borides in the?joint decrease and the uniformity of composition and microstructure of joint improve. When the ratio of DD99?increased to 70% (mass fraction) in the mixed powder filler alloy, it can be observed that element of B diffused to?DD99 additive powder which results in the decrease of low melting point eutectic phases and brittle compounds.?The high temperature tensile properties of joint is 1010 MPa at 870 ℃ and the lasting life under 980 ℃, 200 MPa?is more than 100 h.
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI has been a reliable partner and supplier of sophisticated and high-quality semi-finished products maed of alloys. In dialogue with our customers, we optimise our products to meet the specific application requirements. AILIAI develops the best alloy material solutions for current and future challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信，領英，XING，臉書和推特與我們互動。
For more information on the alloys and services that we supply,?call us?at 086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn,?XING, Facebook?and?Twitter.