TRIP鋼高速拉伸時的馬氏體轉變行為分析
發布人：上海艾荔艾合金股份有限公司www.shailiai.cn
更新時間：2016-05-30
利用 EBSD 技術對不同應變速率下單向拉伸高錳 TRIP 鋼中的馬氏體相變進行了觀察, 使用 XRD 數據計算了奧氏體(γ)、hcp 馬氏體(ε-M)和 bcc 馬氏體(ε-M)的體積分?jǐn)?shù), 并對 γ→ε-M 和 ε-M→α′-M2 階段相變的變體選擇進行了理論計算.
TRIP鋼高速拉伸時的馬氏體轉變行為分析ANALYSIS OF THE MARTENSITIC TRANSFORMATION DURING?TENSION OF HIGH MANGANESE TRIP STEEL AT HIGH STRAIN RATES利用 EBSD 技術對不同應變速率下單向拉伸高錳 TRIP 鋼中的馬氏體相變進行了觀察, 使用 XRD 數據計算了奧氏體(γ)、hcp 馬氏體(ε-M)和 bcc 馬氏體(ε-M)的體積分?jǐn)?shù), 并對 γ→ε-M 和 ε-M→α′-M2 階段相變的變體選擇進行了理論計算. 結果表明, 高速拉伸時 TRIP 行為仍然具有取向依賴性, 這是由不同取向 γ 晶粒內 α′-M 變體的機械功差異引起的. 應變速率的提高促進 ε-M→α′-M 轉變, 但總的馬氏體轉變量降低, 即高速拉伸抑制了TRIP 效應. TRIP 鋼靜態拉伸時 α′-M 變體選擇較強, 動態拉伸時變體選擇減弱. 靜態拉伸時, <111>γ和<100>γ晶粒內 α′-M 變體選擇可用局部應力對變體做功來計算. 高速拉伸時, 需結合應力對 α′-M 變體做功大小及應變能、界面能來分析這些 γ 晶粒內的變體選擇規律. 與 1 個 α′-M 變體單獨出現相
比, 一對具有特殊取向關系的變體同時出現, 可以降低變體的應變能, 使得不利變體能夠出現.?
Among the wide variety of recently developed steels, high manganese transformation-induced?plasticity (TRIP) steels with low stacking fault energy (SFE) are particularly promising. Outstanding mechanical?properties combining a high ductility and a high strength are then obtained. Compared to the static deformation of?high Mn TRIP steels, the behaviors of martensitic transformation and mechanical properties of such steels?during dynamic deformation may be different. In this work, martensitic transformation of high manganese TRIP?steel at different strain rates was characterized by the?EBSD technique. The volume fractions of austenite (γ),?hcp martensite (ε-M) and bcc martensite (α′-M) were?calculated based on the XRD data. Meanwhile, Variant?selections of martensitic transformation in γ→ε-M and?ε-M→α′-M transformation were investigated by?theoretical calculation. It is shown that orientation?dependence of TRIP effect during tension exists even at high strain rates and can be ascribed to the influence of?mechanical work in differently oriented γ grains. The transformation of ε-M→α′-M was promoted, but the total?amount of transformed martensite decreased, which means that TRIP effect was restricted at high strain rates. The?α′-M variant selection is more obvious during static tension and became weaker during dynamic tensile?deformation. α′-M variant selection can be predicted by the calculated mechanical works induced by the local?stress in <111>γ?and <100>γ grains during static tension. However, during dynamic tension, the mechanism of?variant selection needs to be explained by analyzing the mechanical works induced by the local stress, the strain?energy and the interfacial energy in these grains comprehensively. Compared to the occurrence of a single α′-M?variant, a pair of α′-M variants having specific orientation relationship reduces the strain energy, then unfavored?α′-M variants appear.?
作為值得信賴的合作伙伴和高品質金屬合金的半成品供應商，艾荔艾擁有完善的服務體系和專業的團隊。在同客戶交易的過程中，我們力求根據不同的應用需求將我們的產品做到精益求精。針對當前和未來的市場需求，艾荔艾致力于為客戶提供最佳的金屬材料解決方案。
AILIAI
has been a reliable partner and supplier of sophisticated and high-quality
semi-finished products maed of alloys. In dialogue with our customers, we
optimise our products to meet the specific application requirements. AILIAI
develops the best alloy material solutions for current and future
challenges.
獲取更多我們供應的合金和服務信息，請致電086-021-67660801或發電子郵件kefu@ailiaigroup.com聯系我們，您也可以通過微博，微信，領英，XING，臉書和推特與我們互動。
For
more information on the alloys and services that we supply,?call
us?at
086-021-67660801 or email us at kefu@ailiaigroup.com. You can also get in touch
on social media, we are constantly active on?Weibo,?Weixin,?LinkedIn,?XING, Facebook?and?Twitter.